KN 67 HBS Touch has special range of welding capacity..
Machine can weld the blades from 13mm up to 67mm width. The tickness of blades are from 0,90mm up to 1,60mm.

1. 99 log capacity: This make operator to install 99 different size of blade on the machine which in future will help even to use stopper system for automatic replacement of blade on the machine before welding.
2. Clamping air regulation: Machine has manuel air regulators to adjust clamping pressure. Operator can control the adjusted pressure which is indicated on screen. Also the advice of pressure for selected size will appear on screen.
3. Up-setting air regulation: Machine has manuel air regulators to adjust upsetting pressure. Operator can control the adjusted pressure which is indicated on screen. Also the advice of pressure for selected size will appear on screen.
4. Welding power selection: Operator not need to regulate the welding power for each blade size manually, the parameters which is saved on receipt its already has information of welding current and adjusting automatically.
5. Jaw gap for welding: Before operator start to do welding has to regulate jaw gap by hand. Jaw gap value indicated on screen. Also the advice of Jaw Gap for selected size will appear on screen.
6. Counters: HBC type of Temelsan welding machines has more then 110 counters which has for each log ( 99 log = 99 counter) have different counters.
7. Easy and operator friendly interface: The interface of the machine was designed by Temelsan Engineers and with the 10 years of customer feedback. Maximum with three click made operator can get ready for any operation on the machine.
8. High quality equipment: All mechanical parts are designed and made by Temelsan engineering department with many technical calculations. The base materials are always taken one step up then needs. By this we can give the 2 years of warrant for mechanical parts. Also we use the Liming ( which is one of the best qualities on the world about planetary gearbox.

Accessories

Pyrometer auto annealing device
Full Auto annealing control by pyrometer 300-1300°C In combination with our PLC program warranty and same hardness at the weld area compare the band backing steel. The pyrometer cover is a well constructed metal box with fully automatic open and close functionality, switch controlled, includes also the LED working place lamp Temelsan-Swing-Annealing-System (TSAS) 3 different free adjustable Annealing Temperatures with max. Temperature control by Pyrometer (300°C-1300°C), 3 different free adjustable Annealing Time. The TSAS is standard wise supplied for HBA models, for HBS types as optional selection. The pyrometer protection Box is a well constructed metal box with fully automatic open and close functionality, sensor controlled, inside also the LED working place lamp to increase the view by placing the band to weld.

Liquid Cooling System
Cooling System connections of Temelsan HB A models are designed to be able to run a time period of 20-60 seconds for each band saw blade, if the machine should run any minute to weld, is the cooling system of Temelsan a big advantage. Less re-adjustments and less cooling time.The HB A models are so designed, that can be easy connect and start hose connections at the jaws and inside the Transformer are already mounted and ready for use Back on the machines are ready 2 connection points for IN and OUT of cooling Liquid with stopcock on each.

Legal Documentations

• CE Declaration
• PL Report

Technical Documentations

• User manual
• Exploded part views