DK 1500 LS Block Plate Metal Cutting Bandsaw machines are designed for heavy duty industrial use. This machine was designed to high capacity of cutting on less floor area to save the customers place.

STANDART FEATURES

Hydraulic Table
1 x 400mm (16") + 2 x 600mm (24") Aluminum flanged, tapered bandwheels with rubber tires
Upper wheel adjustment up to 76mm (4")
Operator controls mounted on column
One set of saw guide blocks with carbide backup for for chosen bands
One set of metal saw guide inserts for chosen bands
T-Slots for Easy Clamping
Band wheel brush
Work light
Hydraulic Bandsaw Tention Unit With Handle Control
Saw blade guards.
Band door interlocks.
Variable frequency band drive.
Post Elevating By AC Motor
One (1) complimentary Bi Metal saw blade.
Operation and parts manuals always available online
Stop Running upon Bandsaw Breake
Emergency shut-off buttons

SPECIFICATIONS

• Bandsaw Tension Unit: Hydraulic
• Table Stroke: 1500mm ( 59" ) ( Hydraulic )
• Band Driving Type: Frequance | Inverter
• Max. Cutting Height: 1200 mm ( 47" )
• Throat size: 800 mm ( 32" )
• Table Dimensions: 1600mm x 1500mm ( 63" x 59" )
• Table Tilt Left: N/A
• Table Tilt Right: N/A
• Table Tilt Front: N/A
• Table Tilt Back: N/A
• Table Height: 890 mm ( 35" )
• Motor Power: 7,5 kW ( 10 HP )
• Bandsaw Speed: Can be arranged upon request
• Max. Load Capacity: 5000 kg ( 11023 lbs )
• Blade Length: 6850 mm ( 270" )
• Blade Width: 54mm ( 2" )
• Floor Space: 2400mm x 3400mm ( 95" x 134" )
• Overall Height: 3000 mm ( 118" )
• Weight: 7000 kg ( 15432,4 lbs )

OPTIONAL FEATURES

DKO - HBTU
Hydraulic Bandsaw Tension Unit
With this option the operator does not need to use a hand wheel to make the blade under tension for cutting, while the machine is switched on the tension unit works automatically.

DKO - PLC
PLC Control Unit
Basically machines work with contactors which are controlled by the buttons on the control panel. With this option machine moves will be under control of the PLC unit and also the control will be via 7" Sensitive Touch Screen HMI.

 

DKO - SMT
Servo Motion (Ballscrew) Table
TThis option applicable only in case DKO - PLC option is applied on the machine. With this option sure Temelsan Vertical Bandsaw machines are more rehaliable and productive. This option has plural benefits. Torque control on Servo motor make blade life longer also surface will be perfect on workpiece after cutting. 

DKO - PS
Proximity Sensor
This option gives high operational time for cutting. With this option it does not matter where the operator is locating the workpiece, because until the proximity sensor is detected the material table will move at rapid speed until the workpiece. Then it will fall on cutting speed. Therefore operation time will be much faster.

DKO - CL
Band Mist coolant system
While cutting the soft materials blades are getting heated and this makes blade life less also the cutting speed slower. With Mist Spray Coolant blades will stay always cold therefore the blade life will be longer.

 

DKO - LWCS
Liquid Wet Cutting System
It is a solution applied on Block Plate type bandsaw machines for cuts that need to be made with liquid coolant.

DKO - PDSS - 4
Pilz Door Safety System up to 4 Doors
Temelsan Vertical bandsaw machines have interlock safety systems as standard per CE conformity. The Pilz Safety system is needed to reach EN ISO 13849-1/-2 control system safety standards. This option is applicable for the machines which has up to four doors.

DKO - CV
Workpiece Hydraulic Clamping Vice Set ( 2 PCS)
This option is applicable only for block plate cutting machines. In one set of clamping vices there are two clamping units that the operator will be able to fix on the table true the T-Slots. Operator can control the clamping pressure. Also the operator is able to control the vices from the control panel on the column of the machine.

DKO - LCL
Laser for Cutting Line
High quality green ( the producer can change the color ) line laser makes operators work easily to replace the workpiece on the table, their operator can see the cutting line clearly.

DKO - SOTT
Set-up and Training for Counter, XL and LS Type Bandsaw Machines
The SOTT (setup and Operator Training of Temelsan) is made for customers who want to be professionally instructed face to face life at work to operate confidently and professionally the machine they bought from Temelsan. The professional Trainer with a large experience will stay 3 Fully Working days at customers place and instruct the operator for usage and maintenance of machines.
 

DKO - DMPA
Different Motor Power Applications
Temelsan DK 1500 LS type Band Saw Benches are manufactured to operate with a 7,5 kW motor as standard. In line with the demands of our customers, different motors up to 10 kW can be used within the design limits. Do not forget to tell us the amount of power you want in your requests regarding this option.
 

G-DVA
Different Voltage Application
Temelsan Bandsaw machines are produced to work with 380V AC as an standard. Different working conditions about the power source are acceptable with extra cost as well. Price may change regarding the selected options.