DK 600 Block Plate Metal Cutting Bandsaw machines are designed for heavy duty industrial use. This machine was designed to high capacity of cutting on less floor area to save the customers place.

STANDART FEATURES

Servo Motor Controlled Cutting Speed
3 x 600mm (24") Aluminum flanged, tapered bandwheels with rubber tires
Upper wheel adjustment up to 100mm
Operation control on kiosk
One set of Hydraulic saw guide blocks with carbide backup for for chosen bands
One set of metal saw guide inserts for chosen bands
Hydraulic Lift Roller Table
Motorized Band Blade Brush
Work light
Automatic Hydraulic Bandsaw Tention Unit
Automatic Chip Conveyor
Saw blade guards.
Band door interlocks.
Variable frequency band drive.
Automatic Post Elevating By Servo Motor
One (1) complimentary Bi Metal saw blade.
Operation and parts manuals always available online
Stop Running upon Bandsaw Breake
Bandsaw Speed Indicator
Blade Deviation Monitoring
Hydraulic Oil Level Monitoring
Hydraulic Oil Temperature Monitoring
Emergency Stop Buttons
Temelsan Torque Control for Surface Quality
Temelsan Currency Control For Longer Blade Life
19" HMI Sensitive Touch Screen Monitor
Proximity Sensor
Three Linear Guide System
Motorized Blade Change System
Three Different Coolant Liquid Pump
Two Different Hydraulic Pump
Tool Kit

SPECIFICATIONS

• Bandsaw Tension Unit: Hydraulic
• Table Stroke: 6000mm - ( 236" ) .by Servo Motor
• Band Driving Type: Frequance | Inverter
• Max. Cutting Height: 600 mm ( 24" )
• Throat size: 1000 mm ( 40" )
• Table Dimensions: 1000mm x 7500mm ( 40"x295" )
• Table Tilt Left: N/A
• Table Tilt Right: N/A
• Table Tilt Front: N/A
• Table Tilt Back: N/A
• Table Height: 1430 mm ( 56" )
• Motor Power: 7,5 kW ( 10 HP )
• Bandsaw Speed: Can be arranged upon request
• Max. Load Capacity: 10.000 kg ( 22.046 lbs )
• Blade Length: 6300 mm ( 248" )
• Blade Width: 54mm ( 2" )
• Floor Space: 8550mm x 5000mm (337" x 197")
• Overall Height: 3450 mm ( 136" )
• Weight: 35.000 kg ( 77.161,7 lbs )

OPTIONAL FEATURES

DKO-SMST
Standard Manual Secondary Table for DK 6000
Block plate saw on standart its comes with 1000mm x 7500mm (39,3" x 295,2") simply constructed second table. As an option customers can purchase an additional second table with 2000mm x 7500mm (90,5" x 295,2") on this option.

DKO-HTST
High-Tech Secondary Table for DK 6000
Block plate saw on standart its comes with 1000mm x 7500mm (39,3" x 295,2") simply constructed second table. As an option customers can purchase the second table with 2300mm x 7500mm (90,5" x 295,2") loading space including 4 pcs hydraulic lift units.

DKO-STLB
Secondary Table Servo Motion and Hydraulic Clamping Block ( Min 2 PCS )
This option includes hydraulic clamping vices with servo drive material feeding system. This makes automatic reference for material which needs to be cut. Means no trim cut before first cut. The feeding group includes clamping jaws to hold the workpiece so it does not move during the cutting time.

 

DKO - PS
Proximity Sensor
This option gives high operational time for cutting. With this option it does not matter where the operator is locating the workpiece, because until the proximity sensor is detected the material table will move at rapid speed until the workpiece. Then it will fall on cutting speed. Therefore operation time will be much faster.

DKO - CL
Band Mist coolant system
While cutting the soft materials blades are getting heated and this makes blade life less also the cutting speed slower. With Mist Spray Coolant blades will stay always cold therefore the blade life will be longer.

 

DKO-PDSS-5+
Pilz Door Safety System 5+ Doors
Temelsan Vertical bandsaw machines have interlock safety systems as per CE conformity. The Pilz Safety system is needed to reach EN ISO 13849-1/-2 control system safety standards. This option is applicable for the machines which has more then four doors

DKO-LCL
Laser for Cutting Line
High quality green ( the producer can change the color ) line laser makes operators work easily to replace the workpiece on the table, their operator can see the cutting line clearly.


DKO-SOTT-4/6
Set-up and Training for DK 4000 and 6000 Type Bandsaw Machines
The SOTT (setup and Operator Training of Temelsan) is made for customers who want to be professionally instructed face to face life at work to operate confidently and professionally the machine they bought from Temelsan. The professional Trainer with a large experience will stay 3 Fully Working days at customers place and instruct the operator for usage and maintenance of machines.

 

DKO - DMPA
Different Motor Power Applications
Temelsan DK 6000 type Band Saw Benches are manufactured to operate with a 7,5 kW motor as standard. In line with the demands of our customers, different motors up to 10 kW can be used within the design limits. Do not forget to tell us the amount of power you want in your requests regarding this option.
 

G-DVA
Different Voltage Application
Temelsan Bandsaw machines are produced to work with 380V AC as an standard. Different working conditions about the power source are acceptable with extra cost as well. Price may change regarding the selected options.